The solid aluminum extruded heat sink design of the EDI Load Switch and Flasher ensures lower operating temperatures for reliable long term operation.

AC Line Solid State Load Switches

Model 510: The model 510 solid state Load Switch meets all requirements of NEMA TS-1 and NEMA TS-2 Standards. Maximum load current is 10 Amps RMS over full operation temperature.
EDI Model 510 Full Load Test Report

Model 510-225: The model 510-225 solid state Load Switch meets all requirements of NEMA TS-1 and NEMA TS-2 Standards. Maximum load current is 10 Amps RMS over full operation temperature. This unit operates at 220 Volts and 50 Hertz.

Model 200: The model 200 solid state Switch Pack is compatible with Type 170 cabinets. Maximum load current is 10 Amps RMS over full operation temperature.
EDI Model 200 Full Load Test Report

Model 200-225: The model 200-225 solid state Switch Pack is compatible with Type 170 cabinets. Maximum load current is 10 Amps RMS over full operation temperature. This unit operates at 220 Volts and 50 Hertz.


AC Line Solid State Flashers

Model 810: The model 810 solid state Flasher meets all requirements of NEMA TS-1 and NEMA TS-2 Standards. Maximum load current is 15 Amps RMS per circuit over full operation temperature.

Model 810-225: The model 810-225 solid state Flasher meets all requirements of NEMA TS-1 and NEMA TS-2 Standards. Maximum load current is 15 Amps RMS per circuit over full operation temperature. This unit operates at 220 Volts and 50 Hertz.

Model 204: The model 204 solid state Flasher is compatible with Type 170 cabinets. Maximum load current is 15 Amps RMS per circuit over full operation temperature.

Model 204-225: The model 204-225 solid state Flasher is compatible with Type 170 cabinets. Maximum load current is 15 Amps RMS per circuit over full operation temperature. This unit operates at 220 Volts and 50 Hertz.


DC Solid State Load Switches

Model 548: The model 548 solid state load switch is intended for DC powered applications. Maximum load current is 10 Amps at 48 Vdc. Each output is over-current and short circuit protected for maximum reliability. This unit is physically compatible with the standard NEMA or Type 170 load switch.


DC Solid State Flashers

Model 848: The model 848 solid state Flasher is intended for DC powered applications. Maximum load current is 15 Amps at 48 Vdc per circuit. Each output is over-current and short circuit protected for maximum reliability. This unit is physically compatible with the standard NEMA or Type 170 flasher.